【英文标准名称】:Liftsandservicelifts-Specificationforthetestingandinspectionofelectricandhydrauliclifts
【原文标准名称】:电梯与服务电梯.电动和液压升降机的测试和检查规范
【标准号】:BS5655-10-1986
【标准状态】:现行
【国别】:英国
【发布日期】:1986-06-30
【实施或试行日期】:1986-06-30
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:缓冲器件(机械);提升设备;升降机;电阻;客用电梯;货梯;液压操纵装置;耐高压试验;物料搬运设备;接地;安全装置;电驱动装置;货用电梯;检验;维修;性能测试;电绝缘;测试条件;技术文件
【英文主题词】:buffers(mechanical);liftingequipment;lifts;electricalresistance;passengerlifts;servicelifts;hydraulically-operateddevices;high-voltagetests;materialshandlingequipment;earthing;safetydevices;electrically-operateddevices;goodslifts;inspection;maintenance;performancetesting;electricalinsulation;testingconditions;technicaldocuments
【摘要】:Requirementsforthetestingofmodifiedelectricandhydraulicliftsatthetimeofcommissioningandfortheperiodicexaminationofnewandmodifiedlifts.
【中国标准分类号】:Q78
【国际标准分类号】:91_140_90
【页数】:52P.;A4
【正文语种】:英语
基本信息
| 标准名称： | 船用螺旋桨换新技术要求 |
| 中标分类： |
公路、水路运输 >>
船舶维护与修理 >>
船用主辅机及管路附件维护修理 |
| 替代情况： | 被JT/T 285-1995代替 |
| 发布日期： | |
| 实施日期： | 1983-12-01 |
| 首发日期： | |
| 作废日期： | |
| 出版日期： | |
| 页数： | 10页 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 公路 水路运输 船舶维护与修理 船用主辅机及管路附件维护修理
MIL-HDBK-1599A, DEPARTMENT OF DEFENSE HANDBOOK: BEARINGS, CONTROL SYSTEM COMPONENTS, AND ASSOCIATED HARDWARE USED IN THE DESIGN AND CONSTRUCTION OF AEROSPACE MECHANICAL SYSTEMS AND SUBSYSTEMS (2 OCT 1997) (SUPERSEDING MIL-STD-1599]., . This handbook is intended to assist engineers in the design and construction of aerospace mechanical systems for military aircraft. It is intended to serve the engineer by fostering the use of approved standards parts while allowing the freedom to choose non-standard or special parts when a particular application warrants it. It is intended to neither tie the designer's hands nor to grant unlimited license. This handbook is intended to assist engineers: (a) by providing design guidance based on industry-proven engineering practices for bearings, control system components and associated hardware used in aerospace mechanical systems; (b) by requiring the use of approved standard parts in these systems to the largest extent practicable; and (c) by providing for the selection and approval of special parts, when those are necessary and appropriate, through the use of defined procedures.